LTC3788EUH#PBF

LTC3788 is a high performance 2-phase dual synchronous boost converter controller. It drives all N-channel power MOSFETs. Synchronous rectification increases efficiency, reduces power losses and eases thermal requirements, allowing the device to be used in high power boost applications. A constant-frequency current mode architecture allows a phase-lockable frequency of upto 850KHz. OPTI-LOOP® compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. This device features a precision 1.2V reference and dual power good output indicators. Independent SS pins for each controller ramp the output voltages during start-up. The PLLIN/MODE pin selects among Burst Mode® operation, pulse-skipping mode or continuous inductor current mode at light loads. It is widely used in application such as industrial, automotive, medical, military etc.

• Synchronous operation for highest efficiency and reduced heat dissipation
• Chip bias voltage operating range is 4.5V to 38V
• RSENSE or inductor DCR current sensing
• 100% duty cycle capability for synchronous MOSFET
• Low quiescent current is 125µA typical at (RUN1 = 5V and RUN2 = 0V or RUN1 = 0V and RUN2 = 5V)
• Selectable current limit, adjustable output voltage soft-start
• Power good output voltage monitors
• Internal LDO powers gate drive from VBIAS or EXTVCC
• Low shutdown current is 8μA typical at (RUN1,2 = 0V, TA = 25°C, VBIAS = 12V*)
• Operating junction temperature is -40°C to 125°C, package style is 32-lead plastic QFN

Бележки

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party