MAX13053AEASA+

MAX13053AEASA+ is a +5V CAN (control area network) transceiver with integrated protection for industrial applications. This device has extended ±65V fault protection for equipment where overvoltage protection is required. It also incorporates high ±25kV ESD HBM and an input common-mode range (CMR) of ±25V, exceeding the ISO11898 specification of -2V to +7V. This makes this part well suited for applications that are in electrically noisy environments, where the ground planes are shifting relative to each other. It features a variety of options to address common CAN application requirements; logic-level supply input VL for interfacing with 1.62V to 5.5V logic, low-current standby mode, silent mode to disable the transmitter, and a slow slew rate to minimize EMI. It is used in applications such as programmable logic, controllers, industrial automation, building automation, instrumentation, smart grid equipment, drone, motor control.

• Transmitter dominant timeout prevents lockup, short-circuit protection, thermal shutdown
• Slow slew rate to minimize EMI, silent mode S disables transmitter
• STBY input for low-current mode, supply voltage range from 4.5V to 5.5V
• Dominant supply current is 5mA typical at (VDD = 5V, TXD = 0V, no load)
• Standby supply current is 45μA typical at (STBY = logic-high, VDD = 4.5V to 5.5V)
• Input resistance is 50Kohm maximum at (TXD = VL, VDD = 4.5V to 5.5V, VL = 1.62V to VDD)
• Input leakage current (receiver) is 150μA typical at (VDD = VL = 0V CANH = CANL = 5V)
• Slow slew driver rise time is 200ns typical at (RL = 60 ohm, CLD = 100pF, RCM is open)
• Wake up time is 2.2μs typical at ((VDD = 4.5V to 5.5V, VL = 1.62V to VDD, RL = 60 ohm, CL = 15pF)
• Operating temperature range from -40°C to +125°C, 8-pin SOIC package

Бележки

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party