MAX3089CSD+

The MAX3089CSD+ is a fail-safe, high speed (10Mbps), RS485/RS422 transceiver in 14 pin NSOIC package. The fail-safe circuitry in this device features a logic high receiver output when receiver inputs are open or shorted, it means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). This device has selectable slew rate between 115Kbps, 500Kbps and 10Mbps by driving a selector pin with a single three state driver. It has a 1/8 unit load receiver input impedance that allows up to 256 transceivers on the bus.

• Supply voltage range from 4.75V to 5.25V
• Operating temperature range from 0°C to 70°C
• Quiescent current is 375µA
• Selectable between half duplex & full duplex communication
• Independent programmable receiver & transmitter output phase via separate pins
• Low power shutdown mode with 0.001µA supply current
• Features receiver/driver enable function

Приложения

Communications & Networking, Industrial

Предупреждения

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Бележки

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party