MPC852TCVR66A

The MPC8xx series PowerQUICC Processor with CPM (2 SCC, 1 SMC) and 10/100Mbps Ethernet. The MPC852T is a 0.18-micron derivative of the MPC860 PowerQUICC™ family and can operate up to 100MHz on the MPC8xx core with a 66MHz external bus. The MPC852T has a 1.8V core and a 3.3V I/O operation with 5V TTL compatibility. The MPC852T integrated communications controller is a versatile one-chip integrated microprocessor and peripheral combination that can be used in a variety of controller applications. It particularly excels in Ethernet control applications, including CPE equipment, Ethernet routers and hubs, VoIP clients and Wi-Fi access points. The MPC852T is a PowerPC architecture-based derivative of the MPC860 quad integrated communications controller (PowerQUICC). The CPU on the MPC852T is a MPC8xx core, a 32-bit microprocessor that implements the PowerPC architecture, incorporating memory management units (MMUs) and instruction and data caches.

• Embedded MPC8xx core up to 100MHz
• Maximum frequency operation of the external bus is 66MHz
• Up to 32-bit data bus (dynamic bus sizing for 8, 16 and 32 bits)
• 32 Address lines
• Memory controller (eight banks)
• Fast Ethernet controller (FEC)
• General-purpose timers - Two 16-bit timers or one 32-bit timer
• System integration unit (SIU) - Bus monitor, software watchdog and clock synthesizer
• Interrupts - Seven external interrupt request (IRQ) lines and eighteen internal interrupt sources
• Communications processor module (CPM) - RISC controller
• Two baud rate generators - Independent (can be connected to any SCC3/4 or SMC1)
• Two SCCs (serial communication controllers)
• One SMC (serial management channel) - UART
• PCMCIA interface - Master (socket) interface, release 2.1 compliant
• Debug interface
• Normal high and normal low power modes to conserve power

Приложения

Communications & Networking