T1023RDB-PC

T1023RDB-PC is a T1023 Reference design board (T1023RDB) system featuring a QorIQ advanced multicore processor. It combines two 64-bit ISA Power Architecture processor cores with high-performance data path acceleration and network and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and military/aerospace application. This low-cost, high-performance system solution consists of a Printed circuit board(PCB) assembly and a software Board support package (BSP). This BSP enables the fastest possible time-to-market for development or integration of applications including multi-service branch office router, security appliance/UTM and enterprise wireless access point.

• T1023RDB runs at default core frequency 1.2GHz, platform clock 400MHz, DDR4 1600MT/s
• 2GB unbuffered DDR4 SDRAM discrete devices (32-bit bus), 128MB NOR flash single-chip memory
• 512MB NAND flash memory, 256Kbit M24256 I2C EEPROM, 64MB SPI memory and 8GB eMMC 4.51
• Interfaces: PCIe (Lane A: x1 mini-PCIe slot) and (Lane C: x1 mini-PCIe slot)
• 10/100/1000 BaseT Ethernet ports: EC1, RGMII: one 10/100/1000 port with RTL8211FS PHY
• Lane B: 2.5G SGMII port with AQR105 PHY and Lane D: 1G SGMII port with RTL8211FS PHY
• USB 2.0 port: X1 USB2.0 port: connect to a type-A connector
• UART interface: supports one UART at default 115200 Baud rate for console display
• Real-time clock on I2C bus and board connectors (JTAG/COP for T1023 debugging, remote reset header)
• Boot source selection: supports NOR/SD/NAND/SPI boot by the selection of the dip switches

Предупреждения

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.